Input voltage: 24 VDC.
Output voltage: 24 VDC.
Output current/capacity: 5 A/120 W.
Compact DC-DC UPS with a DIN rail for,
mounting, best suited for prevention of,
voltage drop and power failure in,
industrial-purpose computers.
(IPC)/controllers.
System reliability greatly improved because.
24VDC power supply is backed up for a certain SRT2-VOD16ML-1 PDF datasheet .
period of time in the event of voltage drop or power failure SRT2-VOD16ML-1
Compactness, weight reduction, and long battery life,
realized thanks to the adoption of a lithium-ion battery.
Push-in terminal block adopted for the power input and,
output I/F.
Shutdown in conjunction with the industrial,
purpose computer (IPC) or controller realized,
by the USB/RS-232C/I/O port installed in the UPS SRT2-VOD16ML-1 PDF datasheet . Terminal/mounting: Plug-in/DIN rail via socket.
Control voltage: 100/110 VDC.
Under current detection: Instantaneous type.
Solid-state, Plug-in Current Sensor.
Applicable to motor overcurrent protection and 3-phase AC current detection.
Inverse-type, start-up lock type, and instantaneous type over,
current sensors available.
Instantaneous type under current sensor available SRT2-VOD16ML-1 PDF datasheet .
Plug-in design simplifies installation, removal, and wiring.
DIN sized (48 mm x 96 mm). Input voltage: 400 ~ 500 VAC3 phase.
Rated power: 240W.
Output voltage: 24V.
Output current: 10A.
DIN guide rail installation, with 5 A ~ 40 A output current of the power supply OMRON SRT2-VOD16ML-1 PDF catalog.
3 phase 400 ~ 500 VAC.
5, 10, 20 and 40 A; 24 VDC output.
High stability, low ripple and low noise level OMRON SRT2-VOD16ML-1 PDF catalog.
Compact design.
Add fuse protection.
Natural draft。
In addition to the CE tag, but also in compliance with UL60950 (CSA22.2-60950), UL508.
Conform to EN61000-3-2.
Parallel / series operation. Control voltage: 100/110/120 VAC.
Reset: Manual.
Model: Inverse type.
Solid-state Relay Provides Three Operating OMRON SRT2-VOD16ML-1 PDF catalog.
Functions in a Compact Package.
Prevents burnouts in 3-phase induction motors due to overcurrent,
open-phase, or reverse-phase.
LEDs indicate operation of the selected operating function.
Wide setting ranges: current: 1 to 160 A; operating time: 1 to 40 s.
Protects the motor from reversing without starting it.
before using the K2CM. Actuator: Short hinge lever.
Type: Micro load.
Compact, General-purpose Horizontal.
Switches.
Models for Microloads Added to Series.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.),
Incorporates a switch with a durablee coil spring in a tough,
high precision case SRT2-VOD16ML-1 datasheet.
Compact and uses a single basic switch for applications where,
strength is required.
Models for microloads and models with operation indicators,
added to series.
Termminal protective cover can be switched to wire cable from,
either the left or right SRT2-VOD16ML-1 PDF datasheet .
Sealing characteristics that meet IEC IP67 degree of protection.