Classification: LED indicator and diode.
Coil ratings: DC 6, 12, 24, 48.
Contact form: SPDT.
Slim and Space-saving Power Plug-in Relay.
Reduces wiring work by 60% when combined with the,
P2RF-@-PU Push-In Plus Socket.
(according to actual OMRON measurements).
Lockable test button models available G3PE-225B-3N DC12-24 PDF catalog .
Built-in mechanical operation indicator.
Provided with nameplate G3PE-225B-3N DC12-24
AC type is equipped with a coil-disconnection self-diagnostic,
function (LED type).
High switching power (1-pole: 10 A). Isolation: Phototriac coupler.
Zero cross function: Yes.
Indicator: Yes.
Rated output load: 30 A at 200 to 480 VAC.
Rated input voltage: 12 to 24 VDC.
Extremely Thin Relays Integrated with Heat Sinks G3PE-225B-3N DC12-24 PDF catalog .
Downsizing achieved through optimum design of heat sink.
Mounting possible via screws or via DIN track.
Close mounting possible for linking terminals.
(Except for G3PA-260B-VD and G3PA-450B-VD-2.)
Applicable with 3-phase loads.
Replaceable power element cartridges.
Comply with VDE 0160 (finger protection),
with a dielectric strength of 4,000 V between input and load.
Certified by UL, CSA, and VDE (reinforced insulation) G3PE-225B-3N DC12-24 PDF catalog . Isolation: Photovoltaic coupler.
Zero cross function: --.
Indicator: Yes.
Rated output load: 2.5 A at 24 to 240 VDC .
Rated input voltage: 12 to 24 VDC.
New Models with International Standards.
Added to G3H Series (-VD in model number) OMRON G3PE-225B-3N DC12-24 PDF datasheet.
Same Profile as LY1 and LY2 Bi-power.
Relays.
Certified by UL, CSA, and VDE (models numbers with a suffix of “-VD”) OMRON G3PE-225B-3N DC12-24 PDF datasheet.
Socket type, same size as LY Power Relays.
Operation indicator provided to confirm input,
(models numbers with “N” before the suffix). Analog I/O terminal with screw terminal,
block for EtherCAT communicaitons.
The input/output range can be easily,
changed by the setting with the switch OMRON G3PE-225B-3N DC12-24 PDF datasheet.
Detachable screw terminal block,
facilitates the maintenance.
Moving average calculation function.
Settinngs within the range of 100μs-64ms G3PE-225B-3N DC12-24 datasheet.
(For input only.)
Disconnection detection function.
(For input only and for usage with,
1-5V or 4-20mA ranges.)
Selectable node address setting methods:
setting with rotary,

switch and with tool software G3PE-225B-3N DC12-24 PDF catalog .
When setting the nodes with rotary switch,
setting is easy and node identification,
becomes possible for maintenance.