Measuring current: 10 to 100 A AC, 20 to 200 A (See note.).
Supply voltage: 100-115 VAC.
Ideal for current monitoring for,
industrial facilities and equipment.
Monitor for overcurrents or undercurrents.
Manual resetting and automatically resetting supported by one Relay.
Startup lock and operating time can be set separately K8DS-PM Series datasheet.
One SPDT output relay, 6 A at 250 VAC (resistive load) K8DS-PM Series
Output relay can be switched between normally open and,
normally closed.
Process control signal (4 to 20 mA) and commercial CT input,
(0 to 1 A or 0 to 5 A) supported.
Output status can be monitored using LED indicator.
Inputs are isolated from the power supply. Category: external supply 100mA DC10V.
Input type: load sensor, mV input type K8DS-PM Series datasheet.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
Transistor: -; NPN open collector (HH, H, PASS, L, LL).
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC100 ~ 240V.
To support the sensor input, the pressure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified K8DS-PM Series datasheet.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event inputDigital Time Interval Meter for Measuring.
Passing Speed, Time, or Cycle between Two.
Points.
Visual confirmation of judgement results through display colors that,
switch between red and green.
Measures Wide Range of Pulse Interval Times.
Measures, calculates, and displays pulse intervals between two points.
Wide range for pulse interval measurements, from 10 ms to 3,200 s, max.
Six Measurement Operations, Including Passing Speed, Time, and,
Cycle Measurement between Two Points.
One Digital Time Interval Meter has six measurement functions, to support a,
variety of pulse interval measurement applications. Select the best function,
for your application from the following: Passing speed, cycle, time difference,
time band, measuring length, and interval.
DeviceNet models added to the series. Type of input: AC voltage input.
Output type: DeviceNet; -; DeviceNet.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC100 ~ 240V.
96 (W) * 48 (H * 95mm) depth
Some models are not equipped with.
The most suitable voltage aand current signal simulation, measurement and display, identification of the panel table K8DS-PM Series PDF datasheet.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monittoring the operation trend K8DS-PM Series PDF datasheet.
External event input can be applied to a variety of measurement and identification situations.
Series of DeviceNet type.