E32-ZT200 detection distance
Pair shootingSize: M12, Shielded.
Sensing distance: 4.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 56 (70).
Output configuration: NPN.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1 E5AC-RX2DSM-008 datasheet. 5 to 2,
times larger than that of any conventional OMRON Sensor E5AC-RX2DSM-008
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Name: Basic Unit(gradient temperature control)(See note 1.).
Power supply voltage: 24 VDC supplied from the End Unit E5AC-RX2DSM-008 datasheet.
No. of control points: 2.
Control outputs 1 and 2: Voltage output: 2 points (for SSR drive)(See note 2.).
Control outputs 3 and 4: Transistor output: 2 points(sourcing).
Auxiliary output: None.
Functions: Heater burnout alarm, 2 (See note 3.); Event inputs, None.
Communications functions: G3ZA connection port,
RS-485 From End Unit, Port A, RS-485.
Input type: Thermocouple, platinum resistance thermometer,
analog voltage, and analog current selectable for each channel E5AC-RX2DSM-008 datasheet.
Terminal: Screw-less clamp.
Gradient Temperature Control to Achieve.
Consistent Layer Temperature.
Perform gradient temperature control ranging from 2 to 32 channels.
Perform 2-channel gradient temperature control for up to 16,
groups, or 32-channel gradient temperature control for up to 2 groups.
Set gradient temperature control or 2-PID control for each group.
Reduce design work for ladder programming with programless,
connections to Programmable Controllers. (The same feature,
as Standard-control EJ1 Models.).
Connect directly to the G3ZA Multi-channel Power Controller,
using optimum cycle control for high-accuracy control with minimal noise. Fitting materials: Stainless steel (SUS304).
Count: 1 .
Accessories: Description, Phillips screws M3 × 6 (with spring and plain washers);
Material, Iron, zinc plating ;
Count, 2.
Applicablle sensor (mounting pitch on sensor side): E39-R1 E5AC-RX2DSM-008 PDF datasheet.
Page: Dimensions, 10. General-purpose Encoder with.
External Diameter of 50 mm.
Incremental model.
External diameter of 50 mm.
Resolution of up to 2,000 ppr.
IP664 (improved oil-proof construction with sealed bearings) E5AC-RX2DSM-008 PDF datasheet.
Side or back connections are possible. Pre-wired Models with cable,
connected at an angle.