Motor series: low inertia, medium capacity.
Rated output power: 11.0kw.
Rated speed: 1500rpm.
With the brake: without.
Shaft end: straight shaft.
The rotor of the servo motor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the target value, the driver adjusts the rotation angle of the rotor HA-FF43B PDF datasheet HA-FF43B
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines). Servo motor series: medium inertia, small capacity.
Rated output: 0.5kw.
Rated speed: 1000r/min.
Electromagnetic brake: No.
Power supply: 200V.
Stable driving of medium capacity and medium inertia type products HA-FF43B PDF datasheet .
Through the optimization of structural design, to achieve the minimum length of the industry.
High speed & high torque. Shorten the positioning time, achieve high-speed equipment.
Reducing the electric torque ripple.
Through the combination of the optimal number of the motor and the slot number, the torque ripple is greatly reduced,
To further realize the smooth constant speed device HA-FF43B PDF datasheet .
Improve the environmental performance of HG-SR, HG-JR series of products using IP67. Motor series: low inertia, medium power.
Rated output power: 50.0kw.
Rated speed: 1500r/min.
Whether to take the brake: No MITSUBISHI HA-FF43B PDF catalog.
Shaft end: Standard (straight).
Voltage: 400V type.
Protection level: IP65 (IP67).
Features: low inertia from low speed to high speed, three modes can be selected, suitable for different application range MITSUBISHI HA-FF43B PDF catalog. As a standard port, 30KW or greater power is suitable for flange (type) installation and support foot mounting.
Application example: injection molding machine, semiconductor manufacturing equipment, large conveyor machinery MITSUBISHI HA-FF43B PDF catalog.
High resolution encoder 131072p/rev (17 bit).
The encoder with high resolution ensures excellent performance and stability at low speed.
All motor dimensions are the same as before and all are compatible with the wiring. Motor series: low inertia, medium power.
Rated output power: 11.0kw.
Rated speed: 2000r/min.
Whether to bring the brakes: with.
Shaft end: Standard (straight).
Voltage: 400V type.
Protection level: IP65 (IP67).
Features: low inertia from low speed to high speed, three modes can be selected, suitable for different application range. As a standard port, 30KW or greater power is suitable for flange (type)) installation and support foot mounting HA-FF43B datasheet.
Application example: injection molding machine, semiconductor manufacturing equipment, large conveyor machinery.
High resolution encoder 131072p/rev (17 bit).
The encoder with high reesolution ensures excellent performance and stability at low speed HA-FF43B PDF datasheet .
All motor dimensions are the same as before and all are compatible with the wiring.