Measuring current: 10 to 100 A AC, 20 to 200 A (See note.).
Supply voltage: 100-115 VAC.
Ideal for current monitoring for,
industrial facilities and equipment.
Monitor for overcurrents or undercurrents.
Manual resetting and automatically resetting supported by one Relay.
Startup lock and operating time can be set separately K3HB-SSD-CPAC11 AC/DC24 PDF datasheet .
One SPDT output relay, 6 A at 250 VAC (resistive load) K3HB-SSD-CPAC11 AC/DC24
Output relay can be switched between normally open and,
normally closed.
Process control signal (4 to 20 mA) and commercial CT input,
(0 to 1 A or 0 to 5 A) supported.
Output status can be monitored using LED indicator.
Inputs are isolated from the power supply. Category: external supply 100mA DC5V type K3HB-SSD-CPAC11 AC/DC24 PDF datasheet .
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
Relay contact: HH; PASS1c, H, L, LL: each 1a.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
To support the sensor input, the pressure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified K3HB-SSD-CPAC11 AC/DC24 PDF datasheet .
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurementType: Medium-sensitivity models OMRON K3HB-SSD-CPAC11 AC/DC24 PDF catalog.
Sensed current: 500 mA/1,000 mA(switchable).
Type: Delayed models.
Operating time: 0 OMRON K3HB-SSD-CPAC11 AC/DC24 PDF catalog. 3/0.8 s (switchable).
Economical, Compact, High-performance,
DIN 48 × 48-mm Ground Fault Relay for Low,
Voltages.
Performs continuous monitoring and detection of ground faults,
in low-voltage circuits due to the deterioration of insulation in,
electrical devices.
Higher reliability ensured with improved resistance to high-fre,
quency noise when used for inverter loads OMRON K3HB-SSD-CPAC11 AC/DC24 PDF catalog.
Ground Fault Relays and through-type ZCTs (zero-phase current,
transformers) are mutually compatible.
The through-type ZCTs are equipped with test terminals,
allowing operation tests for Ground Fault Relays to be performed withease. New High-speed, High-precision Temperature.
Indicator.
Visual confirmation of judgement results through display colors that,
switch between red and green.
Capable of high-speed sampling at 50 times per second (20 ms).
High-resolution of 0.01°C with platinum-resistance thermometer Pt100,
input. Thermmocouple sensor inputs also support a resolution of 0 K3HB-SSD-CPAC11 AC/DC24 datasheet. 1°C for,
all ranges.
Temperature input shift is easily set using two points.
Series expanded to include DeviceNet models.
UL certification approval (Cerrtification Mark License) K3HB-SSD-CPAC11 AC/DC24 PDF datasheet .
CE Marking conformance by third party assessment body.
Water-resistant enclosure conforms to NEMA 4X (equivalent to IP66).