Name: Three-tier Screw Terminal Block.
Specifications: Inputs/Outputs;
8 inputs/8 outputs; PNP;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced CP1L-EM40DR-D PDF catalog .
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction CP1L-EM40DR-D
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Model: CPM2C-PA201. Input: 100 to 240 V AC CP1L-EM40DR-D PDF catalog . Output: 24 V DC/600 mA.Name: CS1D Duplex Unit.
Specifications: Applicable systems,
Duplex CPU, Dual I/O Expansion System only;
Basic functions, Duplex CPU Unit processing,
error monitoring, and CPU Unit switching,
when error occurs;
Online Replacement, Supported.
Current consumption: 5V system, 0.41A;
26 V system, --.
Standards: UC1, CE.
Redundant CPU Units , Power Supply Units ,
Communications Units ,
and Expansion I/O Cables CP1L-EM40DR-D PDF catalog . Model : CVM1D-CPU21.
For duplex system requires two.Connects to the I/O module located on the extreme right.Unit type: CS1 Special analog I/O Units.
Product name: Analog Output Units OMRON CP1L-EM40DR-D PDF datasheet.
Specifications: I/O points, 4 outputs;
Signal range selection,
Set separately for each input;
Signal range, 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 V to 10 V, 4 to 20 mA;
Resolution, 1/4000 ;
Conversion speed, 1 s/point OMRON CP1L-EM40DR-D PDF datasheet.
Externa connection, Removable erminal block.
Current consumption: 5V, 0.13A; 26V, 0.18A.
Standards: UC1, N, CE.
For Various Analog I/Os.
Analog Input Units for converting,
analog input signals into binary data OMRON CP1L-EM40DR-D PDF datasheet.
Analog Output Units for converting ,
binary data into analog output signals. Power supply voltage: DC100V.
Note: operation with output contacts.
Power supply unit.
The power supply of the CPU rack is supplied by the power supply unit.
The following power units are available for selection.
C200HW-PA204 (voltage: AC100-120V/AC200-240V)
C200HW-PA204S (voltage: AC100-120V/AC200-240V)
C200HW-PA204R (voltage: AC100-120V/AC200-240V)
C200HW-PD024 (voltage: DC24V)
In the past, PC connected to a measurementt equipment or components must be given to the ASCII unit or BASIC unit to write a communication program CP1L-EM40DR-D datasheet.
Now, PC C200HX/HG/HE is installed on the communication protocol macro function,
Can be configured to these communicaations procedures through the PMCR instruction to the ladder program,
With this function system can be easily connected with a wide range of components CP1L-EM40DR-D PDF catalog .