Cable length: 25m.
For long distance connections between QCPU and GOT (above 13.2M) (need A9GT-QCNB).
Long distance connection between two GOT.
Applicable models: GT16, GT15, GT11, GT27, GT25. Cable length: 10m.
For the connection between the two graphic operations.
Applicable models: GT16, GT15, GT11 GT1155-QSBDQ Connection Manual. 15 inches /10.4 inch /8.4 inch /12.1 inch with.
GOT front USB interface with protective cover (for replacement) GT1155-QSBDQ
Applicable models: GT27, GT25. Support for 12.1 inch.
Applicable models: GT16, GT15. Cable length: 1m.
Can be used when the GT15-C / EXSS-1 and GT15-C / BS combination.
Applicable models: GT16, GT15, GT11. Cable length: 5m.
The connection between the CC-LINK interface unit and the smart GOT GT1155-QSBDQ Connection Manual.
Applicable model: HandyGOT. For the QnA/ACPU/ controller CPU (A Series) the bus (1 channel) thin type unit.
Applicable models: GT15, GT16. For the GT105 - /GT104 - (operating system for project data transmission).
Applicable model: GT10. Cable length: 3m.
For connection between QnA/A/FXCPU (D-SUB25 pin connector) and GOT.
Connection between serial communication unit (AJ71QC24-R4) and GOT GT1155-QSBDQ Connection Manual.
Applicable models: GT10, GT21. Protective film for 3.7 inch screen.
Scrub (frame: white), 5.
Applicable model: GT1020. Series: multimedia and advanced features and features of a variety of high-performance models.
Screen size: 8 MITSUBISHI GT1155-QSBDQ Manual . 4 inches.
Display color: 256 color or more color.
Installation type: compatible with multimedia and video /RGB.
Resolution: VGA (640 x 480) MITSUBISHI GT1155-QSBDQ Manual .
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
High performance models with multimedia and advanced features and functionality (including embedded communications capabilities).
User storage capacity: 15MB (GT16__-VNB__:11MB) MITSUBISHI GT1155-QSBDQ Manual .
With HOST USB and device USB port.
Standard Ethernet, RS-422/485 and RS-232 ports.
Support multimedia and video /RGB units.
Analog touch panel.
Do not let the touch screen surface with water drops or other soft things stick to the surface,
Otherwise, the touch screen is easy to mistake that there is a hand touch caused by surface acoustic wave screen is not allowed.
In addition to cleaning the dirt on the surface of the touch screen,
You can use a soft dry cloth or a cleaning agent to clean out the center of the screen carefully,
Or use a dry soft cloth dipped in industrial alcohol or glass cleaning fluid to clean the touch screen surface.
Touch screen response is slow if you use a hand or other touch to touch the surface acoustic wave touch screen,
This shows that it is likely that the touch screen system has been obsolete, the internal clock frequency is too low,
Or because there is water in the surface of the touch screen to make the touch screen mobile, rapid response recovery,
To replace or upgrade the system must, or use dry cloth touch screen on the surface of the water GT1155-QSBDQ Mitsubishi plc Connections.
If the user is operating the touch screen, the direction of the touch move is to the left,
But the cursor of the system moves to the right,
The failure may be due to the conneection of the control box and the touch screen connected to the connector or the touch screen,
Users as long as the direction of the re exchange of it GT1155-QSBDQ Connection Manual.