Type: screw terminal type, general type with cable.
Rated current; 0.1A AC125V.
Drive rod: ball plunger type.
Terminal: screw terminal with cable (right hand side).
Action indicator: no operation indicator.
Compared with D4E performance is stronger, in compliance with the requirements of high durability, high sealing D4N-2B32 INSTRUCTION sheet.
Horizontal spring, with improved swing lever ratio of the built-in switch to provide a smooth action effect and a longer period of use D4N-2B32
Protection cover protects built-in switch from dust and oil pollution damage.
The plunger type combined with the solid sealing cover has longer service life.
One touch off connector wiring operation miscellaneous,
And reduce the downtime due to wiring and maintenance D4N-2B32 INSTRUCTION sheet.
Gold Plated minimum load type is an ideal choice for electronic control.
Can provide terminal type plastic screw terminal system and terminal type plastic with operation indicator.
Certified by EN, UL, CSA and CCC (China Standard) standard.
Install the pitch and with the characteristics of D4E- - N and D4E. Ratings: 1 A at 30 VDC.
LED indicator: With indicator D4N-2B32 INSTRUCTION sheet.
Actuator: Sealed pin plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement OMRON D4N-2B32 Manual.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating) OMRON D4N-2B32 Manual.
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) Terminals: Straight.
Actuator: Hinge lever.
Door Switch Incorporated,
with Two Circuits for Power,
Loads and Micro Loads.
Compact size, with two separate circuits for power and signals OMRON D4N-2B32 Manual.
Panel- or screw-mounted with ease. Drive rod: leaf Shibai rod type.
Contact specifications: 1b D4N-2B32 .
Rating: general load with 1A.
For the automobile, industrial vehicles, mechanical testing of the anti immersion type (in line with IP67)
Use M4 screw to achieve a little installation.
Using a strong fixed leaf swiing rod which can adapt to the harsh environment D4N-2B32 INSTRUCTION sheet.
Full consideration of environmental protection, the installation of the wire also lead to lead free.