Rated voltage: 115 V .
Permitted voltage fluctuation range: 85% to 110% rated voltage.
Frequency: 50/60 Hz.
Rated current: 50 Hz, 0.080 A; 60 Hz, 0.070 A .
Rated input: 50 Hz, 7 W ; 60 Hz, 6 W .
Rated rotational speed: 50 Hz, 2200 r/min; 60 Hz, 2500 r/min.
Maximum flow rate: 50 Hz, 0.6 m3/min; 60 Hz, 0 R88M-K5K020H-BOS2-Z Manual. 7 m3/min.
Maximum static pressure: 50 Hz, 25.0 Pa; 60 Hz, 32 R88M-K5K020H-BOS2-Z0 Pa.
Noise: 50 Hz, 26 dB; 60 Hz, 29 dB.
Optimum Cooling with a Comprehensive.
Lineup of Axial Fans.
Low noise level, long service life, and resistance to the,
environment.
Shaft supported by ball bearings for highly-reliable operation.
Plastic-bladed models (44 type) and metal-bladed models,
(28 type) included in series R88M-K5K020H-BOS2-Z Manual.
R87T-A@A15H-WR Water-resistant AC Axial Fans,
(IP X7 degree of protection) added to series.
CE marking compliant and certified by UL and CSA.
Note: The compliant standards and certified safety standards depend on the,
product. Check the information given for available models of Axial fans and,
the information in Characteristics. Rated voltage: 100 V .
Permitted voltage fluctuation range: 85% to 110% rated voltage R88M-K5K020H-BOS2-Z Manual.
Frequency: 50/60 Hz.
Rated current: 50 Hz, 0.063 A; 60 Hz, 0.055 A .
Rated input: 50 Hz, 5 W ; 60 Hz, 4 W .
Rated rotational speed: 50 Hz, 1900 r/min; 60 Hz, 2100 r/min.
Maximum flow rate: 50 Hz, 0.4 m3/min; 60 Hz, 0.5 m3/min.
Maximum static pressure: 50 Hz, 19 OMRON R88M-K5K020H-BOS2-Z INSTRUCTION sheet. 5 Pa; 60 Hz, 23.5 Pa.
Noise: 50 Hz, 28 dB; 60 Hz, 30 dB.
Optimum Cooling with a Comprehensive OMRON R88M-K5K020H-BOS2-Z INSTRUCTION sheet.
Lineup of Axial Fans.
Low noise level, long service life, and resistance to the,
environment.
Shaft supported by ball bearings for highly-reliable operation.
Plastic-bladed models (44 type) and metal-bladed models,
(28 type) included in series.
R87T-A@A15H-WR Water-resistant AC Axial Fans,
(IP X7 degree of protection) added to series OMRON R88M-K5K020H-BOS2-Z INSTRUCTION sheet.
CE marking compliant and certified by UL and CSA.
Note: The compliant standards and certified safety standards depend on the,
product. Check the information given for available models of Axial fans and,
the information in Characteristics. High-Speed and High-Precision.
G5 Series MECHATROLINK-II.
Communications with the Controller.
Data transfer using MECHATROLINK-II.
Communicattions:
All control data that can be interfaced between the Servo Driver,
and the Controller is transmitted using data communications R88M-K5K020H-BOS2-Z .
This enables maximizing the Servomotor performance without,
restricting the transmisssion performance of the control signals R88M-K5K020H-BOS2-Z Manual.
Having a communications module built into the Servo Driver,
significantly saves space in the control panel.