Name: Analog I/O Slave Units.
Specifications: Analog inputs;
4 inputs.
Standards: CE, U, U1, C, N.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system CJ1G-CPU43H PROGRAMMING MANUAL.
A wide variety of CompoNet Slave Units,
contribute to system size reduction CJ1G-CPU43H
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Analog Output Unit CJ1G-CPU43H PROGRAMMING MANUAL.
Output points : 4 inputs.
Signal range selection:
Set separately for each input.
Signal range: 4 to 20 mA, 1 to 5 V.
Conversion speed (resolution):
100ms/4 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.15A; 26V, 0.16A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices CJ1G-CPU43H PROGRAMMING MANUAL.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value OMRON CJ1G-CPU43H Manual.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them OMRON CJ1G-CPU43H Manual.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems OMRON CJ1G-CPU43H Manual.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBBs/LCUs,
to construct complete process control systems CJ1G-CPU43H .
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools. C500-NC Special I/O Unit C/CV Servo Module Single Axis Stepperr C500-NC111-EV1 CJ1G-CPU43H PROGRAMMING MANUAL. Number of outputs: 6 pts.
Max. switch-ing capacity: 0.4 A at 100 to 240 V AC.
External connector: Terminal block.
Weight: 240 g max.