Model: C200HW-PD024.
Supply voltage: 24VDC.
Comments: --.C500-OA I/O Unit Triac Output 16 pts C500-OA226.
AC250V 1.2A.I/O Terminal Cover For 20-pin block, standard C500-COV13CV500-BS CPU Bus Unit BASIC Unit CV500-BSC11.
RS-232C: 2 ports, RS-422: 1 port.C500-IA I/O Unit AC Input 32 pts C500-IA223(3G2A5-IA223) CS1W-LCB05-GTC Manual.
AC200-240V 10mA.Name: Clamp Terminal Blocks.
Specifications: Inputs; 8 inputs ; NPN; -- CS1W-LCB05-GTC
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site CS1W-LCB05-GTC Manual.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Unit type: CJ1 Special I/O Units.
Product name: Analog Input Unit.
I/O points: 4 inputs;
Signal range selection: 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 to 10 V, 4 to 20mA;
1/4,000(Settable to 1/8,000)*2 CS1W-LCB05-GTC Manual.
Conversion period: 1 ms/point,
(250 μs/point can also be set.)*2.
Accuracy at ambient temperature of 25°C:
Voltage: ±0.2% of F. S. Current: ±0.4% of F.S.
External connection: Removable terminal block OMRON PLC Module Manual.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.42A; 24V, --.
Standards: UC1, N, L, CE.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup OMRON PLC Module Manual.
Analog Input Units for converting analog input,
signals into binary data.
Analog Output Units for converting binary ,
data into analog output signals. C200HS-CPU31-E CPU
High-Performance CIM Version, Built-in RS-232C Port
The C200HS-CPU31-E and C200HS-CPU33-E controller offers the same basic functionality as the C200HS-CPU01-E/CPU03 controlllers OMRON PLC Module Manual CS1W-LCB05-GTC REFERENCE MANUAL.
This CPU may be used ineither SYSMAC NET and/or SYSMAC LINK communication systems.
The built-in RS-232C port supports the same communications as the C200HS-CPU21/CPU23.Name: Host Link Module.
Moodel: C200H-LK202-V1 CS1W-LCB05-GTC Manual.
Communication ports: 1 RS-422.Model: C200H-DA001.
Input points: 2.
Voltage input: 1 to 5V or 0 to 10 V.
Current input: 4 to 20 mA.