Connection type: Screw - Screw.
Description: Controller link repeater unit (wire to wire).Model: CPM2A-20CDT1-D. Power supply: DC power supply.
Output type: Transistor sourcing.
Inputs points: 12 points.
Outputs points: 8 points.C500-OA I/O Unit Triac Output 16 pts C500-OA222(3G2A5-OA222).
AC132V 1A CRT1-VID16ML Manual. 1 set (2 included).Unit type: CS1 Special I/O Units.
Product name: Analog Input Unit (100 mV) CRT1-VID16ML
Input points : 8 inputs.
Signal range: 0 to 100 mV, ±100 mV.
Conversion speed (resolution):
200ms/8 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.15A; 26V, 0.08A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices CRT1-VID16ML Manual.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them CRT1-VID16ML Manual.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems OMRON remote terminals Manual.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring OMRON remote terminals Manual.
systems can be constructed,
or the Units can be used together with LCBs/LCUs,
to construct complete process control systems.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools. Unit classification: CJ1 Special I/O Units.
Product name: Temperature Control Units OMRON remote terminals Manual.
Specifications; No. of loops: 2 loops,
heater burnout detection function;
Temperature sensor inputs: Thermocouple,
input (R, S, K, J, T, B, L);
Control ouutputs: Open collector,
PNP outputs (pulses) CRT1-VID16ML UL Standards and CSA Standards.
No. of unit numbers allocated: 2.
Current consumption: 5V, 0.25A; 24V, --.
Standards: UC1, N, L, CE.
A Single Unit Performing All the Functions of,
4 Temperature Controllers.
A Special I/O Unit with direct input,
of thermocouple or resistance thermometer,
PID control with 2 degrees of freedom,
and open collector output CRT1-VID16ML Manual.