Protective film for 8.4 inch screen.
Scrub, 5.
Applicable model: GT15. Applicable models: GT11, HandyGOTCable length: 3m.
For connection between FXCPU (MINI-DIN8 pin connector) and GOT.
Connection between FXCPU communication function extension board (MINI-DIN8 pin connector) and GOT.
Applicable models: GT16, GT15, GT11, HandyGOT, GT10, GT27, GT25, GT23,, GT21 GT1585V-STBD Gateway Functions Manual. Cable length: 0 GT1585V-STBD5m.
For the connection between QnAS/AnSCPU/ motion controller A7GT-CNB (A Series) and CPU.
Applicable models: GT16, GT15, GT11. Protective film for 5.7 inch screen.
Transparent, 5.
Applicable model: GT14. Coaxial bus unit.
Applicable models: GT15, GT16, GT27, GT25. Protective film for 4.7 inch screen.
Transparent, 5.
Applicable model: GT104 GT1585V-STBD Gateway Functions Manual. Protective film for 5.7 inch screen.
Scrub (frame: white), 5.
Applicable model: GT11. Protective film for 4.7 inch screen.
Transparent (frame: white), 5.
Applicable model: GT104. Used to install SD storage cards.
Applicable model: GT21. Protective film for 15 inch screen.
Scrub (frame: white), 5.
Applicable model: GT16. 15 inches.
Applicable model: GT27. Cable length: 20 meters GT1585V-STBD Gateway Functions Manual.
QnACPU GOT.
RS-422 conversion (FA-CNV / CBL) cable GOT.
The serial communication module GOT.
The peripheral machine connection module (AJ65BT-G4-S3) GOT.
[D-sub 25 pin loose line (row 5 pin interface terminal)].
GT2103-PMBD does not support Q00JCPU, Q00CPU, CPU Q01CPU direct connection.
Applicable model: GT21. Protective film for 10.4 inch screen.
Scrub (frame: white), 5.
Applicable model: GT15. Features: high cost of second models.
Picture size: 10.4 inches.
Resolution: VGA.
Display: TFT color.
Panel color: black.
Power type: DC24V.
Specification rich, design at ease
GT23 standard supports SD memory card and standard equipped with Ethernet, RS-232, RS-422/485, host/device USB interface.
Support log, one to many connections, FA transparent transmission and other diverse FA machine related functions.
System configuration diagram shows in order to form the connection with the GOT programmable controller system,
Easily confirm module status. In addition, after touching each module,
Can start its corresponding expansion function, to facilitate system maintenance, shorten the time of failure.
1, simple design
In order to cope with the use of a variety of scenarios, to abandon all the nonsense of the decoration, the use of straight tone of the minimalist design.
2, plane body
Surface mining pure plane design, easy to clean. (USB interface at the back)
3, Ethernet interface
Up to 2 different manufacturers can be connected to the FA machine.
4, RS-232 interface
Can connect all kinds of FA machine, bar code reader, serial printer.
5, RS-422/485 interface
Can be connected to a variety of FA machines, bar code reader.
6, USB interface: device USB (Mini-B USB)
Can connect to the computer to transfer data.
7, USB interface: host USB (USB-A)
USB data can be transmitted through the USB memory or read log data, such as the GOT data, but also can be connected too the use of the mouse, keyboard GT1585V-STBD Manual .
8, SD memory card slot
Can save alarm and log data, such as a large number of data.
Can be collected through the GOT programmable controller, temperature regulator and other data, and to chart, list display GT1585V-STBD Manual .
Computer analysis can also be used to save the data. Even in the case of a power outage, the log data can be saved to the built-in SRAM.