LK Automation Limited LK Automation Limited
Download Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Manual Download >> GT1030-LBD2-C
MITSUBISHI GT1030-LBD2-C Instructions Manual GT1030-LBD2-C Manual
Product model: GT1030-LBD2-C
Name: touch screen
Brand: MITSUBISHI
Sort: Instructions Manual
File language: English
Oil resistant cap for 3.7 inch screen.
Applicable model: hand held GOT. 10.4 inches.
Applicable models: GT27, GT25, GT23. For the GT1685M-STB.
Applicable model: GT16. Cable length: 3.0m.
For the connection between QCPU and GOT.
For connection between two GOT.
Applicable models: GT16, GT15, GT11, GT27, GT25 GT1030-LBD2-C Instructions Manual. 12.1 inches.
Surface treatment: transparent.
Protective film color: No GT1030-LBD2-C
USB protection cover parts: there is an opening.
Set number: 5.
Applicable models: GT27, GT25. For the GT1695M-XTB.
Applicable model: GT16. Cable length: 0.2m.
Connection between RS-422/485 (connector) and RS-422 cable (D-SUB9 pin) for GT16.
Applicable model: GT16. For the GT1662-VNB.
Applicable model: GT16. 32MB extended memory GT1030-LBD2-C Instructions Manual.
Applicable model: GT15. "Series introduction: with a variety of advanced features of the compact model.
Screen size: 5.7 inches.
Display color: 256 color or more color.
Installation type: hand held.
Resolution: QVGA (320 x 240).
Display device: STN monochrome.
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
The first characteristic of touch screen:
Transparent, it directly affects the visual effect of touch screen GT1030-LBD2-C Instructions Manual.
The problem of transparency is the degree of transparency, infrared technology, touch screen and surface acoustic wave touch screen is separated by a layer of pure glass,
Transparency can be considered a leader, the other touch screen this is a good scrutiny, transparency",
The touch screen industry, is a very broad concept, many touch screen is a multilayer composite film,
It''s not enough to generalize its visual effect with only a little transparency,
It should include at least four characteristics: transparency, color distortion, reflection and clarity, but also,
For example, the degree of reflection, including the degree of specular reflection and diffraction,
But the touch screen surface diffraction reflection has not reached the extent of the CD disk,
For users, these four metrics are basically enough. "Series: multimedia and advanced features and features of a variety of high-performance models.
Screen size: 15 inches.
Display color: 256 color or more color.
Installation type: compatible with multimedia and video /RGB.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
High performance models with multimedia and advanced features and functionality (including embedded communications capabilities).
User storage capacity: 15MB (GT16__-VNB__:11MB).
With HOST USB and device USB port.
Standard Ethernet, RS-422/485 and RS-232 ports.
Support multimedia and video /RGB units.
Analog touch panel.
Do not let the touch screen surface with water drops or other soft things stick to the surface,
Otherwise, the touch screen is easy to mistake that there is a hand touch caused by surface acoustic wave screen is not allowed.
In addition to cleaning the dirt on the surface of the touch screen,
You can use a soft dry cloth or a cleaning agent to clean out the center of the screen carefully,
Or use a dry soft cloth dipped in industrial alcohol or glass cleaning fluid to clean the touch screen surface.
Touch screen response is slow if you use a hand or other touch to touch the surface acoustic wave touch screen,
This shows that it is likely that the touch screen system has been obsolete, the internal clock frequency is too low,
Or because there is water in the surface of the touch screen to make the touch screen mobile, rapid response recovery,
To replace or upgrade the system must, or use ddry cloth touch screen on the surface of the water GT1030-LBD2-C Manual .
If the user is operating the touch screen, the direction of the touch move is to the left,
But the cursor of the system moves to the right,
The failure may be due to the conneection of the control box and the touch screen connected to the connector or the touch screen,
Users as long as the direction of the re exchange of it GT1030-LBD2-C Manual .
Related products
MITSUBISHI
4.5 Inch Touch Screen
GT1030-LWDW
MITSUBISHI 4.5 Inch Touch Screen GT1030-LWDW
Series introduction: set a numer of as
MITSUBISHI
Resist film
GT10-30PSCB
MITSUBISHI Resist film GT10-30PSCB
Protective film for 4.5 inch screen. Tra
MITSUBISHI
4.5 Inch Touch Screen
GT1030-LWD2
MITSUBISHI 4.5 Inch Touch Screen GT1030-LWD2
Series introduction: set a numer of as
MITSUBISHI
4.5 Inch Touch Screen
GT1030-LBDW2
MITSUBISHI 4.5 Inch Touch Screen GT1030-LBDW2
Series introduction: set a numer of as