LK Automation Limited LK Automation Limited
Download Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Manual Download >> GOT2000 Series
MITSUBISHI GOT2000 Series MES Interface Function Manual
Product model: GOT2000 Series
Name: HMI
Brand: MITSUBISHI
Sort: MES Interface Function Manual
File language: English
Cable length: 2.5m.
For motion controller CPU (A series, the main base system) and the connection between A7GT-CNB.
Applicable models: GT16, GT15, GT11. 1GB flash ROM.
Applicable models: GT16, GT15, GT11, HandyGOTWith 4.3 inch widescreen.
Surface treatment: transparent.
Protective film color: No.
USB protective cover parts: no openings GOT2000 Series .
Set number: 5.
Applicable model: GT21. Cable length: 6m GOT2000 Series
The connection between the CC-LINK interface unit and the smart GOT.
Applicable model: HandyGOT. Function: the core function of the condensed display.
Picture size: 3.8 inches.
Resolution: 320 * 128 dot.
Display: TFT monochrome.
Panel color: black.
Power type: DC5V.
Communication interface: RS-232, RS-422/485, or only RS-422 GOT2000 Series .
Small body equipped with ethernet!
Compared with the past, the upgrade of 320 x 128dot 4 x high resolution lcd.
HD LCD screen.
Equipped with TFT monochrome 32 gray level of high resolution liquid crystal, compact body design and display the effect is clear.
1, SD memory card module with the interface.
Can be installed to buy the SD memory card module, save the alarm and log data GOT2000 Series .
2, USB interface: device USB (Mini-B USB)
Can connect to the computer to transfer data.
3, RS-422/485 interface.
Can be connected to a variety of FA machines, bar code reader.
4, Ethernet interface.
Up to 2 different manufacturers can be connected to the FA machine.
Backlight color variety, equipment status at a glance.
The use of direct 5 color backlight, according to the production of equipment, respectively, the use of backlight color / flicker.
In addition, the control of the backlight can be carried out by connecting the programmable controller. (picture color switching, ON/OFF/ flashing backlight). Accessories for 8.4 inch models.
Applicable models: GT16, GT15. Cable length: 5.0m.
For the connection between QnAS/AnSCPU/ motion controller A7GT-CNB (A Series) and CPU.
Applicable models: GT16, GT15, GT11. A series of high performance models that are widely used in network or single machine work environments.
Screen size: 10.4 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screeen system GOT2000 Series MES Interface Function Manual.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two oor more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly GOT2000 Series MES Interface Function Manual.
Related products
MITSUBISHI
Servo driver
MR-J4-11KB-RJ010
MITSUBISHI Servo driver MR-J4-11KB-RJ010
1 axis servo amplifier. MITSUBISHI gener
MITSUBISHI
Extended bottom plate
A1S65B
MITSUBISHI Extended bottom plate A1S65B
5 slots. Can e installed in the power s
MITSUBISHI
Old small A series main substrate
QA1S33B
MITSUBISHI Old small A series main substrate QA1S33B
3 slots requires 1 AnS series PLC power