For the QCPU (Q mode) / transport controller CPU (Q Series) bus connection (2 channel) unit standard model.
Applicable models: GT15, GT16, GT27, GT25. Protective film for 5.7 inch screen (for HandyGOT).
Scrub (frame: white), 5.
Applicable model: used for hand held GOT GT11. Cable length: 10m.
For the connection between QCPU and GOT MITSUBISHI GRAPHIC OPERATION TERMINAL Connection Manual.
For connection between two GOT GT2508F-VTNA
Applicable models: GT16, GT15, GT11, GT27, GT25. Cable length: 20m.
For long distance connections between QCPU and GOT (above 13.2M) (need A9GT-QCNB).
Long distance connection between two GOT.
Applicable models: GT16, GT15, GT11, GT27, GT25. Cable length: 20m.
For connection between FXCPU (MINI-DIN8 pin connector) and GOT.
Connection between FXCPU communication function extension board (MINI-DIN8 pin connector) and GOT MITSUBISHI GRAPHIC OPERATION TERMINAL Connection Manual.
Applicable models: GT10, GT21. Protective film for 4.5 inch screen.
Scrub, 5.
Applicable model: GT1030. Cable length: 1m.
The connection between the FXCPU (MINI-DIN8 pin connector) and the graphic operation terminal.
Connection between FXCPU communication function extension board (MINI-DIN8 pin connector) and GOT MITSUBISHI GRAPHIC OPERATION TERMINAL Connection Manual.
Applicable models: GT10, GT21. For GT1585V-STB / /GT1585-STB.
Applicable model: GT15. "Cable length: 0.6m.
For the connection between QCPU and GOT.
For connection between two GOT GT2508F-VTNA Connection Manual.
Applicable models: GT16, GT15, GT11, GT27, GT25. Protective film for 3.7 inch screen.
Transparent (frame: white), 5.
Applicable model: GT1020 GT2508F-VTNA Connection Manual. 8.4 inches.
Surface treatment: transparent.
Protective film color: No.
USB protection cover parts: there is an opening.
Set number: 5.
Applicable models: GT27, GT25. Function: high performance and low price in the middle end model.
Picture size: 12.1 inches.
Resolution: SVGA.
Display: TFT color GT2508F-VTNA Connection Manual.
Panel color: black.
Power type: DC24V.
Communication interface: CC-Link IE network communication module set.
Middle end model of high performance and low price.
GT25 standard supports SD memory card and standard equipped with Ethernet, RS-232, RS-422/485, host/device USB interface.
Even in the log, script, alarm, soft component data transmission, such as high load processing period, but also to achieve smooth operation of the screen.
Connect GOT front USB interface and computer,
Can be through the FA, the GOT machine programming, start and adjust the operation,
Save the trouble of opening the control cabinet and changing the cable.
1, USB interface: device USB machine (Mini-B USB)
Can connect to the computer to transfer data.
2, USB interface: host USB (USB-A)
USB data can be transmitted through the USB memory or read log data, such as the GOT data, but also can be connected to the use of the mouse, keyboard.
3, the extension of the interface
Communication module and optional module can be installed.
4, Ethernet interfface
Up to 4 different manufacturers can be connected at the same time
FA machine GT2508F-VTNA Manual .
5, RS-232 interface
Can connect all kinds of FA machine, bar code reader, serial printer.
6, RS-422/485 interfface
Can be connected to a variety of FA machines, bar code reader MITSUBISHI GRAPHIC OPERATION TERMINAL Connection Manual.
7, SD memory card slot
Can save alarm and log data, such as a large number of data.