Detection methods: on the radio type (projector + optical device).
Connection: socket type (M12).
Detection distance: infrared 20m.
Output mode: NPN output.
Optical projector: 2M E3Z-FTN22-L.
Optical device: 2M E3Z-FTN22-D. Size: 1/4 DIN 96 × 96 × 78 (W × H × D).
Power supply voltage: 24 VAC/VDC.
Input type: Thermocouple or Resistance thermometer OMRON rotary encoder INSTRUCTION sheet.
Alarm output: 3 E6B2-CWZ6C-10
Control output: Voltage output (for driving SSR).
Functions: Heater burnout, NO; Mounting option units, Yes.
Previous model: None.
These Best-selling General,
purpose Temperature Controllers,
Are Now Even Better.
Controllers now available with analog inputs.
Faster sampling at 250 ms.
Transfer output provided for easy output to recorders OMRON rotary encoder INSTRUCTION sheet.
Models available with a loop break alarm (LBA) and,
heater short alarm (HS alarm).
Manual output provided.
Easy setting with 11-segment displays.
New protocol called Modbus is installed in the,
models with communications.
USB-Serial conversion cable is available.
Note: Refer to Precautions on page 33. Size: 96 × 96 mm.
Control type: 2-loop control.
Control mode: 2-loop standard control, 2-loop heating and cooling control,
Single-loop cascade control, Single-loop control with remote SP,
Single-loop proportional control OMRON rotary encoder INSTRUCTION sheet.
Outputs(control/transfer): 4 points: Pulse voltage (2 points) and,
Pulse voltage/current (2 points) E6B2-CWZ6C-10 INSTRUCTION sheet.
Optional functions: Auxiliary outputs (SUB), 4;
Event inputs, 4; Serial communications, RS-485 E6B2-CWZ6C-10 INSTRUCTION sheet.
E5AR Digital Controllers offer high speed,
high precision, and multiple I/O and use a 5-digit,
3-row LCD display for high visual clarity.
A short sampling period of 50 ms enables use in applications,
requiring high-speed response.
PV, SP, and MV data is displayed simultaneously in a 3-row,
negative LCD display with a backlight E6B2-CWZ6C-10 INSTRUCTION sheet.
Multiloop control, cascade control, and proportional control are,
possible with a single Controller.
When using models with CompoWay//F communications, initial,
settings can be downloaded and settings can be masked using,
Support Software (CX-Thermo version 4 E6B2-CWZ6C-10 Manual. 0 or higher).
Equipped with calculation functions as a standard (e.g., square,

root calculation and broken-line approximation) OMRON rotary encoder INSTRUCTION sheet.
DeviceNet Communications.
Data setting and monitoring can be performed without special programming.