LK Automation Limited LK Automation Limited
Download Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Manual Download >> E5CSZ-QTD
E5CSZ-QTD Manual OMRON temperature controller E5CSZ-QTD INSTRUCTION Manual
Product model: E5CSZ-QTD
Name: temperature controller
Brand: OMRON
Sort: INSTRUCTION Manual
File language: English
Temperature range: -50°C to 50°C.
A Wide Variety of High-precision.
Temperature Sensors.
Previous models with M3 screw connections have been joined,
by new models with ferrules to help reduce wiring work.
Ideal for the thermal input devices of Temperature Controllers.
Select from a wide variety of Temperature Sensors according,
to the temperature to be measured, location, and environment,
and also according to the type and shape of the terminal OMRON temperature controller INSTRUCTION Manual E5CSZ-QTD Sensing method: Diffuse-reflective Sensors.
Appearance: Vertical.
Connection method: Pre-wired.
Sensing distance: 700 mm.
Functions: Timer Self Diagnosis .
Model: PNP output.
Ordering Information.
Built-in Amplifier Photoelectric Sensors OMRON temperature controller INSTRUCTION Manual. Sensing method: Through-beam Sensors.
Appearance: Vertical.
Connection method: Pre-wired.
Sensing distance: 7 m.
Functions: Timer Self Diagnosis Turbo External Diagnosis.
Model: PNP output.
Ordering Information.
Built-in Amplifier Photoelectric Sensors. Detection mode: diffuse reflection type.
Connection: socket type (M12).
Detection distance: infrared 1mmmm.
Output mode: NPN output. Type: Standard models OMRON temperature controller INSTRUCTION Manual.
Connecting method: Pre-wired (2 m).
Model: NPN output.
Applicable wire-saving connector(sold separately): Type,--; Model,--.
Stable Detection with Advanced Fiber E5CSZ-QTD INSTRUCTION Manual.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 years E5CSZ-QTD INSTRUCTION Manual.
Power turning to easily set the optimum light level.
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy.
GIGA RAY for stable detection with the highest level of power in,
this class even for low-reflective objects and large objects E5CSZ-QTD INSTRUCTION Manual.
The E3X-DA0-S supports an EtherCAT Sensor Communications,
Unit or CompoNet Sensor Communications Unit. Size: 48 x 48mm.
Body: terminal type.
Category: control output 2 point type (power supply AC100 ~ 240V).
Shell color: black.
Control output 1: voltage output (SSR driver).
Control output 2: voltage output (SSR driver).
Control mode: standard or heating cooling.
Auxiliary output points: 2 points.
The failure detection function of the heater with the broken line and SSR: -.
Event input points: -.
Transfer output: -.
Communication: RS-485.
General thermostat new high performance (high resolution, high speed, high precision input) type products.
Support simple operation, preventive maintenance, using a new type of liquid crystal, visual angle, contrast to enhance.
High resolution 5 bit display / can display 0.01 degrees C (to achieve a small size of 48 x 48mm).
High speed sampling period 60ms.
All models (thermocouple /Pt/ analog input switching), 1 machines to support a variety of sensorss E5CSZ-QTD Manual.
Add PV/SV state display function, to see the state of the thermostat.
(automatic / manual, RUN/STOP, alarm), interactive display PV/SV.
By supporting software (CX-ThermoVer.4.0) to carry out a simple function (AND/OR logic and delay),
Be able to eexecute flexible contact output
Increase the control output ON/OFF number counting function, can predict the temperature controller internal relay fault
Related products
OMRON
Temperature Controllers
E5CSV-R1T
OMRON Temperature Controllers E5CSV-R1T
Size: E5CSV 48 × 48mm. Type: Terminal
OMRON
Basic-type Digital Temperature Controller
E5GN-QTD-C
OMRON Basic-type Digital Temperature Controller E5GN-QTD-C
Case color: Black. Control output: Volt
OMRON
Digital temperature controller
E5CST-Q1P
OMRON Digital temperature controller E5CST-Q1P
Type: temperature measurement impedance