LK Automation Limited LK Automation Limited
Download Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Manual Download >> D4N-8D2HR
D4N-8D2HR Manual OMRON D4N-8D2HR INSTRUCTION sheet
Product model: D4N-8D2HR
Name: pull-reset safety limit switch
Brand: OMRON
Sort: INSTRUCTION sheet
File language: English
Ratings: 1 A at 30 VDC.
LED indicator: With indicator.
Actuator: Pin plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection OMRON D4N-8D2HR INSTRUCTION sheet.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating) D4N-8D2HR
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) Actuator: Fork lever lock (left operation).
Conduit size: 1-conduit; M20.
Built-in switch mechanism: 2NC (Slow-action).
Popular Safety Limit Switches OMRON D4N-8D2HR INSTRUCTION sheet.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads OMRON D4N-8D2HR INSTRUCTION sheet.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC.
Ratings: Standard load; 4 A at 30 VDC.
Cable: VCTF cable *2.
Actuator: Sealed roller plunger.
Cable length : 5 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Type: M10.
Actuator: Wobble stick actuator; Short spring.
Cable length: 1 m.
Detects Objects in Multiplee Directions,
with High Sensitivity, Ideal for Robotics,
Slow-action switching mechanism used D4N-8D2HR Manual.
Gold-plated contact with coil spring capable of switching,
micro current/voltage load while providing high contact reliability.
Inpuuts directly to microcomputers and programmable controllers D4N-8D2HR Manual.
Three sizes (M10, M8, and M5) and three types of compact actuators.
Easy panel mounting.
Related products
OMRON
Safety Limit Switch
D4N-4132
OMRON Safety Limit Switch D4N-4132
Actuator: Roller plunger. Conduit size:
OMRON
Safety Limit Switch
D4N-8B2G
OMRON Safety Limit Switch D4N-8B2G
Actuator: Adjustale roller lever, form
OMRON
Safety Limit Switch
D4N-6A31
OMRON Safety Limit Switch D4N-6A31
Actuator: Plunger. Conduit size: 2-cond
OMRON
Safety Limit Switch
D4N-9E62
OMRON Safety Limit Switch D4N-9E62
Actuator: One-way roller arm lever hori