Master station.
Province distribution network module in cabinet and device.
Link to connect the 64 stations when the fastest scanning time for 1.2ms (rate 2.5Mbps).
According to the transmission distance, the transmission rate is selected from 2.5Mbps, 625kbps and 156kbps.
CC-Link/LT from the station does not need any parameter settings Q12DCCPU-V Programming Manual .
Only need to set up the transmission speed in the master module, you can use the remote I/O Q12DCCPU-V
QJ61CL12 can be used as the main station of CC-Link/LT.Input / output points: 1024 points.
Number of input and output elements: 8192.
Program capacity: 15 K step.
Processing speed: 0.06 s.
Program memory capacity: 60 KB.
Support USB and RS232.
Unable to install memory card Q12DCCPU-V Programming Manual .
Ultra high speed processing, production time is shortened, better performance.
As applications become larger and more complex, it is necessary to shorten the system operation cycle time.
The operation period can be shortened by the super high basic operation speed 1.9ns.
In addition to achieve in the past with the control of single-chip high-speed control,
The system performance can be improved by reducing the total scan time,
To prevent any possible performance bias Q12DCCPU-V Programming Manual .
High speed and high precision data processing.
The processing speed of the real number (floating point) arithmetic has been greatly improved,
Addition instruction reached 0 MITSUBISHI Q12DCCPU-V Manual. 014 mu s,
Therefore, it can support the request of high-speed, high-precision processing data processing.
In addition, the new addition of double precision floating point arithmetic instructions,
Simplify the programming, reduces the computational error when executing complex formula MITSUBISHI Q12DCCPU-V Manual. MODBUS/TCP Master slave station.
10BASE-T/100BASE-TX.
MODBUS interface module capable of connecting MODBUS compatible device such as temperature regulator, measuring device and so on MITSUBISHI Q12DCCPU-V Manual.
Support MODBUS communication function, and can be compatible with the third party MODBUS to communicate from various station equipment.
Support MODBUS communication functions from the station, can communicate with the third party programmable controller MODBUS master device.
Through the linkage function, the master can be cconnected to the CH1 side (RS-232),
And through the QJ71MB91 and connected to the CH2 side (RS-422/485) of a number of stations for communication Q12DCCPU-V Common Instructions 1/2.
The RS-232 interface (1 credit on the 1 pass) MODBUS master device withh multiple MODBUS communication from the station equipment Q12DCCPU-V Programming Manual . (only QJ71MB91)
Master / slave station functions can be used simultaneously. (only QJ71MT91)