Name: e-CON Connectors.
Specifications: Inputs; 16 inputs; NPN;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system OMRON CJ2M-CPU13 Safety Precautions.
A wide variety of CompoNet Slave Units,
contribute to system size reduction CJ2M-CPU13
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. 8 pts, No-voltage contact. NPN.Model: C200H-OD411.
No. of points: 8 pts OMRON CJ2M-CPU13 Safety Precautions.
Specifications: 1A, 12 to 48 VDC.General Information
The C200HS-SLK12 SYSMAC LINK fiber-optic module connects the PLC to the SYSMAC
LINK fiber-optic token bus peer-to-peer communications network. An external power supply option provides direct pass-through communications in case of modulSpecification: Platinum resistance thermometer input (Pt, JPt),
ON/OFF or advanced PID control,
tran-sistor (NPN) output, 2 loops OMRON CJ2M-CPU13 Safety Precautions. C500-OC I/O Unit Transistor Output 16 pts C500-OC221(3G2A5-OC221).
AC250/DC24V 2A.Unit classification: CJ1 Special I/O Units.
Product name: Position Control Units,
(High Speed type).
Specifications; Control method/Control,
output interface: Pulse-train open-collector,
output with Pulse Counter Function;
Number of control axes : 4 axes.
No. of unit numbers allocated: 2.
Current consumption: 5V, 0.31A; 24V, --.
Standards: UC1, CE.
Motion Control Capabilities with Unit,
Synchronization and Even Higher Speed.
Models are available with 2 or 4 axes,
and open-collector or line-driver outputs.
The CJ1W-NC214/NC414 have open-collector outputs,
and the CJ1W-NC234/NC434 have line-driver outputs.
Control 2 or 4 Axes High-speed,, high-resolution,
position control is possible for servomotors ,
and pulse motors, and even linear motors,
and direct drive motors CJ2M-CPU13 Manual. C500-NC Special I/O Unit Position Control For pulse motors 2 axes C500-NC211.Supply voltage: 1000 or 230 V AC (selectable), 50/60 Hz CJ2M-CPU13 Manual.
Operating voltage range: 85 to 265 V AC.
Output capacity: 5 V DC: 6 A 24 V DC: 0.5 A(30 W total, see note).