Unit type: CJ1 CPU Bus Units.
Product Name: Position Control,
Units with EtherCAT interface.
Specifications: Control output interface,
Control commands executed by,
EtherCAT communications.
Positioning functions: Memory operation,
Direct operation by ladder programming,
I/O communications: 64 nodes;
No OMRON CJ2H-CPU67 Manual. of axes: 16 axes.
No. of unit numbers allocated: 1.
Current consumption : 5V, 0 CJ2H-CPU6746A; 24V,--.
Standards: UC1, CE.
Preeminent control performance and,
easy operation feature of EtherCAT,
improve the production efficiency.
The EtherCAT communications with,
100Mbps baud rate enables fast,
and accurate position control.
A wide range of position control,
functions are available with,
this position control unit OMRON CJ2H-CPU67 Manual. Model: CPM2C-16ET1M. Units with transistor outputs only.
1 MIL connector.
Outputs: 16 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.4 thermocouple inputsCV500-CN Cable Motion Control Connecting Cables 4 m CV500-CN424CP1W-CIF41.
One Ethernet Option Board can be mounted in either option board slot 1 or 2.
Note: Cannot be used for the CP1L-L10.Model: C200H-CN131 OMRON CJ2H-CPU67 Manual.
Cable length: 1, 000cm.Specifications: Two RS-422A/485 ports.C500-NC Special I/O Unit Position Control For pulse motors 2 axes C500-NC222Product name: CS1 CPU Backplane.
Specifications: For both CS/C200H-series Units,
Units cannot be mounted; 10 slots.
Appli cable CPU Unit: CS1 CPU Unit.
Basic I/O Units: CS-series Basic I/O Unit,
Yes; C200H series Basic I/O Unit, Yes;
C200H Group-2 High density I/O Unit, Yes.
Special I/O Units: CS-series Special I/O Unit,
Yes; C200H series Special I/O Unit, Yes.
CPU Bus Units: CS-series CPU Bus Unit, Yes.
Current consumption: 5V system, 0.11A;
26 V system, --.
Standards: U, C, N, L, CE.
Multi-application Controllers:
From High-performance Machine C,
Highly Reliable Process Control. Model: C500-CE243.
Connection : Pressure welded.
FCN-367J024-AU/FPower supply: AC power supply.
Output method: Transistor output source type.
Inputs points: 24 points.
Outputs points: 16 points.CPU Unit: CP1L-L CPU Units with 20 Points.
Specifications: CPU type, Memory capacity: 5K steps
High-speed counters: 100 kHz, 4 axes Pulse outputs:
100 kHz, 2 axes (Models with transistor outputs only);
Power supply, DC power supply; Output mmethod, Relay output;
Inputs, 12; Output, 8 CJ2H-CPU67 PROGRAMMING MANUAL.
Standards: UC1, N, L, CE.
High Performing Programmable Controller with Embedded Ethernet.
"CP1L-EM" and "CP1L-EL" has a standard-feature Ethernet port.
"CP1L-M" and "CCP1L-L" has a standard-feature peripheral USB port CJ2H-CPU67 PROGRAMMING MANUAL.
Function blocks (FB) allow you to build up modular structure and,
programming of ladder diagrams.