Name: External Connector.
Model: C500-CE404.
Specifications: Solder terminal; 40p and a Connector Cover (Horizontal-type).Name: e-CON Connectors.
Specifications: Inputs/Outputs;
16 inputs /16 outputs; NPN;
Without Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet OMRON PLC INSTRUCTIONS REFERENCE MANUAL.
Branching is easily made with CompoNet CJ1G-CPU45H
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error OMRON PLC INSTRUCTIONS REFERENCE MANUAL. Unit name: Loop Control Boards.
Specifications: No. of function blocks:
50 blocks max.
Standards: UC1, N, CE.
The open nature of the PLCs is joined,
by integrating hardware, software,
and networking to meet your needs.
Increasing amounts of information,
standardization, and open standards,
form the basis for achieving hardware,
and networking capabilities for process control OMRON PLC INSTRUCTIONS REFERENCE MANUAL.
A wide range of software that can be easily,
used by design, development, and maintenance,
personnel makes operating and maintaining,
the system far easier. CV500-FH SYSMAC BUS PC Unit Floppy/Hard Disk Drive For 100 VAC CV500-FHD01-ESize: 60mm CJ1G-CPU45H INSTRUCTIONS REFERENCE MANUAL.
Type: 4 lines.
Lighting voltage: DC24V CJ1G-CPU45H INSTRUCTIONS REFERENCE MANUAL.
Color: red.
Large tactile buttons and uniform lighting to create a general space.
Backlight brings a uniform, elegant and pleasant lighting.
Large tactile buttons are easier to touch.
Drive rod mechanism to keep the direction of the parallel button, even if the pressure on the side of the CJ1G-CPU45H INSTRUCTIONS REFERENCE MANUAL.
Damping mechanism to ensure high impact resistance.
A slim body with a thickness of 14.6 mm. C500-ID I/O Unnit DC Input 16 pts 8 pts/common C500-ID112 CJ1G-CPU45H Manual.
DC5-12V 6mA.Power supply: DC power supply.
Output method: Transistor output source type.
Inputs points: 24 points.
Outputs points: 16 points.Connects to the I/O moodule located on the extreme right OMRON PLC INSTRUCTIONS REFERENCE MANUAL. Model: C200H-AD003.
Input points: 8.
Voltage input: 1 to 5 V, 0 to 10 V, or –10 to 10 V.
Current input: 4 to 20 mA.