LK Automation Limited LK Automation Limited
Download Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Manual Download >> AJ35T-M12B-L
A/D|D/A Converter Module AJ35T-M12B-L User's Manual MITSUBISHI AJ35T-M12B-L Manual
Product model: AJ35T-M12B-L
Name: A/D|D/A Converter Module
Brand: MITSUBISHI
Sort: User's Manual
File language: English
Series Name: A953GOT.
Size: 6 inches.
Resolution: 320 * 240.
Display equipment: high brightness TFT color display.
Display color: 256 color.
Power supply: DC24V.
The built-in RS-232 communication interface.
Memory card: 1M.
Design any machine interface, generally have to consider the system response time, user assistance mechanism, error information processing and command mode four aspects AJ35T-M12B-L User's Manual AJ35T-M12B-L
System response time is too long to be the most users in the interactive system,
In addition to the absolute length of the response time, the user is also very concerned about the difference in response to different commands in response time,
If too wide users will be difficult to accept; user assistance mechanism should be integrated,
Avoid overlay systems that cause users to turn to a guide and have to browse a large number of irrelevant information;
Error and warning information must be selected in terms of user''s clarity and meaning,
At the same time, it should be as far as possible to provide some suggestions on the recovery of errors AJ35T-M12B-L User's Manual.
In addition, when the error message is displayed, the effect is better if it is supplemented by the auditory (Bell) and visual (special color) stimulus;
Command mode is the best menu and keyboard commands, for the user to choose AJ35T-M12B-L User's Manual. Description: the maximum number of connections: paragraph 10, can form a T type branch wiring MITSUBISHI AJ35T-M12B-L Manual .
Spare 5 products for different purposes.
Thin waterproof type relay hub.
Extension of star type wiring and main line length, waterproof structure MITSUBISHI AJ35T-M12B-L Manual .
Spring clip terminal type relay hub.
Star type wiring, length of the main line, spring clamping terminal table type.
Relay appliance (T branch) unit.
Extension of T type branch and trunk length.
Relay unit in light.
In the presence of interference in the environment of the wiring, the length of the trunk line MITSUBISHI AJ35T-M12B-L Manual .
Relay unit in space light.
Communication between linear moving bodies. Input points: 16 points.
Input voltage and current: 3/7mA DC12/24V.
Input response time: 10ms.
16 point /1 a public side.
Positive and negative sharing.
Output points: 16 points.
Output voltage: DC24V/AC240V, 2A/1 point, 4A/ common end.
Output response time: 12ms.
Output type: relay output.
8 point /1 a public end, 4 points / a public end.
50 point terminal station.
Control solenoid valve required I/O points by the action principle of the solenoid valve can be known,
A single coil solenoid valve with PLC control to 2 input and 1 output,
A double coil solenoid valve requires 3 inputs and 2 outputs,
A button needs an input; a light sensitive switch needs 4 or 2 inputs,
A signal lamp needs 1 output, band switch,
Several bands are required for several inputs,
In general, a variety of position switches are required to take up 2 input points.
MITSUBISHI PLC is the main product in the production of MITSUBISHI motor in Dalian.
It uses a kind of programmable memory for its internal storage procedures,
Execute logic operation, sequence control, timing, counting and arithmetic operations, user oriented instruction,
And through digital or analog input / output control of various types of machinery or production process.
The number of I/O thyristor DC motor control required tube DC motor speed control system is the main form of DC speed regulation,
The thyristor rectifier unit is used to supply power to the DC motor.
PLC control of the DC drive system, the input of the PLC in addition to the main signal outside the signal,
We need to consider the switching signal, the fault signal transmission device, braake signal and fan fault signal AJ35T-M12B-L .
The output of the PLC mainly consider the speed command signal positive 1~3 level, 1~3 level, allowing reverse switching signal and brake open signal etc..
In general, a reversible DC drivee system controlled by PLC is approximately 12 input points and 8 output points,
An irreversible DC drive system requires 9 inputs and 6 output points AJ35T-M12B-L User's Manual.
Related products
MITSUBISHI
Analog module
AJ35T-M08B-R
MITSUBISHI Analog module AJ35T-M08B-R
Analog channel: 8 channels. Input / outp
MITSUBISHI
Analog module
AJ35T-M12B-R
MITSUBISHI Analog module AJ35T-M12B-R
Analog channel: 12 channels. Input / out
MITSUBISHI
Analog module
AJ35T-M04B-L
MITSUBISHI Analog module AJ35T-M04B-L
Analog channel: 4 channels. Input / outp
MITSUBISHI
Analog module
AJ35T-M12B-L
MITSUBISHI Analog module AJ35T-M12B-L
Analog channel: 12 channels. Input / out