Connector 24 PIN Crimp Type C500-CE242Number of outputs: 32 pts.
Max. switch-ing capacity: 0.5 A at 24 V DC.
External connector: Connector.
Weight: 210 g max.
CV500-BS CPU Bus Unit BASIC Unit CV500-BSC21
RS-232C: 2 ports, RS-422: 1 port.C500-NC Special I/O Unit C/CV Servo Module Single Axis Stepper C500-NC111-EV1 CV500-BSC21.Unit type: CJ1 Basic I/O Units.
> Product name: DC Input Units.
Specifications: I/O points, 64 inputs;
Input voltage and current: 24 VDC, 4.1 mA;
Commons, 16 points, 1 common; External connection,
Fujitsu connector; No CV500-BSC21. of words allocated, 4 word.
Current consumption: 5V, 0.09A; 24V, --.
Standards: UC1, N, L, CE.
A Wide Range of Basic Input,
Units for High Speed Input and,
Different Applications.
Receive ON/OFF signals from external,
devices into the PLC System to update,
I/O memory in the CPU Unit CV500-BSC21.
New high-speed input models CJ1W-ID212 and,
CJ1W-ID233 are now available. These units can,
help to increase system throughput. Supply voltage: 100 to 120 or 200 to 240 VAC (automatic voltage setting), 50/60 Hz
Operating voltage range: 85 to 132 or 170 to 264 VAC
Power consumption: 200 VA max OMRON CV500-BSC21.
Output capacity: 12 A, 5 VDCI/O Cable (for I/O to Interface Racks) 50 m (L) CV500-CN532Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Thermocouple Input Units OMRON CV500-BSC21.
points Input: 8 inputs.
Signal range selection:
Set separately for each input.
I/O type: R, S, K, J, T, L, B.
Conversion speed: 250 ms/8 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1 OMRON CV500-BSC21.
Current consumption: 5V, 0.18A; 26V, 0.06A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring. <
systems can be constructed,
or the Units can be used together with LCBs/LCUs,
to construct complete process control systems CV500-BSC21.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.