LK Automation Limited LK Automation Limited
Download Sort: OMRON | MITSUBISHI | Proface | Mennekes | Yaskawa
Manual Download >> GT15-QBUS2
MITSUBISHI GT15-QBUS2 User's Manual GT15-QBUS2 Manual
Product model: GT15-QBUS2
Name: BUS CONNECTION UNIT
Brand: MITSUBISHI
Sort: User's Manual
File language: English
Optical fiber loop unit.
Applicable models: GT15, GT16, GT27, GT25. Accessories for 8.4 inch models.
Applicable models: GT16, GT15. 12.1 inches.
Surface treatment: anti reflective film.
Protective film color: No.
USB protection cover parts: there is an opening.
Set number: 5.
Applicable models: GT27, GT25 GT15-QBUS2 User's Manual. RS-232 serial communication unit (D-sub9 pin (header).
Applicable models: GT15, GT16, GT27, GT25 GT15-QBUS2 Protective film for 15 inch screen.
Scrub, 5.
Applicable model: GT16. 5.7 inches.
Surface treatment: anti reflective film.
Protective film color: No.
USB protection cover parts: there is an opening.
Set number: 5.
Applicable model: GT27. Function: the core function of the condensed display.
Picture size: 3 GT15-QBUS2 User's Manual. 8 inches.
Resolution: 320 * 128 dot.
Display: TFT monochrome.
Panel color: black.
Power type: DC5V.
Communication interface: RS-232, RS-422/485, or only RS-422.
Small body equipped with ethernet!
Compared with the past, the upgrade of 320 x 128dot 4 x high resolution lcd.
HD LCD screen.
Equipped with TFT monochrome 32 gray level of high resolution liquid crystal, compact body design and display the effect is clear GT15-QBUS2 User's Manual.
1, SD memory card module with the interface.
Can be installed to buy the SD memory card module, save the alarm and log data.
2, USB interface: device USB (Mini-B USB)
Can connect to the computer to transfer data.
3, RS-422/485 interface.
Can be connected to a variety of FA machines, bar code reader.
4, Ethernet interface.
Up to 2 different manufacturers can be connected to the FA machine.
Backlight color variety, equipment status at a glance.
The use of direct 5 color backlight, according to the production of equipment, respectively, the use of backlight color / flicker.
In addition, the control of the backlight can be carried out by connecting the programmable controller. (picture color switching, ON/OFF/ flashing backlight). 10.4 inches.
Applicable models: GT27, GT25, GT23. A series of high performance models that are widely used in network or single machine work environments.
Screen size: 15 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: XGA (1024 x 768).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re caalibrated to the touch screen system GT15-QBUS2 Manual .
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two oor more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly GT15-QBUS2 Manual .
Related products
MITSUBISHI
Large CPU expansion cable
GT15-AC06B
MITSUBISHI Large CPU expansion cable GT15-AC06B
Cale length: 0.6m. For QnA/ACPU/ motion
MITSUBISHI
Enclosure
GT15-50ATT-95W
MITSUBISHI Enclosure GT15-50ATT-95W
Accessories for 5.7 inch models. Applica